.
.
Datsun Roadster Rear
Wheel Spacers from Rallye
Kind
of a crude perimeter cut but useable. Could be used on
fronts if center hole was enlarged properly to slide
completely over front hub. May originally have been
made up spacers for a 510 or Z-car; which have smaller
diameter front hubs. They are about 1/4" thick
(actually about .240". Center hole is about 2 11/16";
to use this on the front the hole would have to be
about 3 3/16".
Datsun SPL310 SPL311
SRL311 REAR WHEEL SPACERS from Rallye